Tin weld

welders for any occasion

For good tin welding, it will be necessary to have a good welder suitable for the type of welding we have to make. There are several types:

precision electric welder

Fine-fine precision electric welder, suitable for small wire wires or electronic cards

electric gun welder

Pistol electric welder, effective for welding small and medium size electrical wires

electric welder welder

Electric bender welder for wide welding

gas tank welder

Gas tin welder, useful in case of no electric current or near vicinity.

tinned electric cable

We will then have to clean the surfaces to be welded by applying the special "strong paste" which serves to deoxidize the surface making welding more adherent.

In the case of electric wires it will be useful to tincture (apply with the tin welder) the cable before proceeding with the actual welding.

Once this is done, we can combine the two parts, for example the two cables, placing them parallel and applying them through the additional paver welder.

To make the weld more resistant do not blow on the welded part.

weld electric cable

Let's remember to protect the junction with the insulating tape or insert a shrink tube before welding.

The tube placed on the junction will then be reduced by the use of a flame. In this way the junction will remain perfectly isolated.

welding pond


The pond for welding is in fact a tin and lead alloy. Depending on the characteristics of the alloy, its melting point is between 195 and 325 °C.

This material is suitable for both copper and brass welding. On iron, instead, it produces less resistant welds.


Hang the chandelier


Light color


Ready Made lamp


Light diffusion


Install a ceiling lamp


Table lamps

Portaombrelli design Luca Perlini

Share your experence