Repair a door by replacing the broken glass

the interior doors

Replace glass

glass door broken

You must first remove from the frame glass fragments remained attached, possibly using a pair of rubber gloves.

It begins from those at the top, which are the most precarious to pass then to the other: it takes away the door from its hinges, resting on a working plane.

If the glass was inserted in grooves then remove the broken pieces and then purify the grooves with a small screwdriver.

The Existing stucco must be scraped off and must be removed any strips clamps, screwed or nailed. At this point it is necessary to take the measures of the plate (that must be of a couple of millimeters below those recorded for both have an easier insertion, is to leave a little game in anticipation of a possible expansion.

Get the new glass, which must obviously have the same thickness as the previous one, otherwise it is not possible to do this enter the groove.

put in place the glass, fixing it again with the strips.

For greater safety, if the glass is not tempered, you can siliconare the glass to the frame. This will retain the splinters in case of breakage.

Carpenter

Repair a rolling shutter

Carpenter

Make a DIY shelf

Carpenter

Remove the splinters

Carpenter

Repair a drawer

Carpenter

Restore an old wooden piece of furniture

Carpenter

Place tapped wooden beads

Portaombrelli design Luca Perlini

PurplePrice

Portaombrelli design Luca Perlini

Attaccapanni equilibrio design Luca Perlini

PurplePrice

Attaccapanni equilibrio design Luca Perlini

Letto baldacchino design Luca Perlini

PurplePrice

Letto baldacchino design Luca Perlini

Tavolo cave design Luca Perlini

PurplePrice

Tavolo cave design Luca Perlini

Attaccapanni Bitta set design Luca Perlini

PurplePrice

Attaccapanni Bitta design Luca Perlini

Attaccapanni Bitta set design Luca Perlini

PurplePrice

Poltrona Ozio design Luca Perlini

hometrustworld
Portaombrelli design Luca Perlini

Share your experence